Installation and user manual · CND-1101
Single Motor Control Unit
01Overview
Drive, limit and position control for single-motor systems.
CND-1101 Single Motor Control Unit is an industrial automation control board designed for single DC motor drives used in pergola and awning systems. It operates within a 12–24V DC input voltage range and supports up to 10A motor current. With its built-in Hall-Encoder input, it precisely tracks the motor position. Integration with smart home systems is provided through dry contact and shutter inputs. It offers professional installation and ease of use with an audible warning buzzer, limit buttons, and wireless communication module.
- Model code
- CND-1101
- Product family
- Control Boards
- Architecture
- Standalone
- Status
- Available
02Safety notes
Installation must be carried out by a qualified electrician in accordance with applicable regulations.
This section is in preparation
Our team is preparing the content. If you need it now, write to us with the product code. Write to us
03In the box
This section is in preparation
Our team is preparing the content. If you need it now, write to us with the product code. Write to us
04Wiring
The terminal and pin table is already in the Technical data section.
05Mounting and installation
This section is in preparation
Our team is preparing the content. If you need it now, write to us with the product code. Write to us
06Configuration and pairing
This section is in preparation
Our team is preparing the content. If you need it now, write to us with the product code. Write to us
07Operation
This section is in preparation
Our team is preparing the content. If you need it now, write to us with the product code. Write to us
08Troubleshooting
This section is in preparation
Our team is preparing the content. If you need it now, write to us with the product code. Write to us
09Technical data
- Model code
- CND-1101
- Product family
- Control Boards
- Architecture
- Standalone
- Status
- Available
- Unit
- Piece
- Datasheet
- Revision 1
Electrical characteristics
| Parameter | Value |
|---|---|
| Input Voltage | 12–24V DC |
| Max. Input Current | 10A |
| Motor Output Current | 10A (continuous) |
| Motor Type | DC Motor (Forward / Reverse) |
| Encoder Support | Hall-Effect Quadrature (A/B phase) |
| Dry Contact | 2 channels (Up / Down) + COM |
| Shutter Input | 3 channels (N / Up / Down) |
| Wireless | Wi-Fi + Bluetooth |
| Audible Warning | Built-in buzzer |
| Limit Setting | On-board Up/Down limit buttons |
| Protection | Overcurrent, short circuit, thermal protection |
| Operating Temperature | −20°C ~ +60°C |
| PCB Size | 120 × 80 mm |
| Mounting | Enclosure mounting (DIN rail optional) |
Connectors
CN1Power & Motor Output
| Pin | Signal | Description |
|---|---|---|
| 1 | 12–24V DC (+) | Supply voltage positive input |
| 2 | 12–24V DC (+) | Supply voltage positive input (parallel) |
| 3 | Motor Forward | Motor forward direction power output |
| 4 | Motor Reverse | Motor reverse direction power output |
CN2Hall-Encoder Input
| Pin | Signal | Description |
|---|---|---|
| 5 | Encoder GND (−) | Hall-Encoder negative supply |
| 6 | Encoder VCC (+) | Hall-Encoder positive supply |
| 7 | Encoder A | Hall-Encoder phase A signal |
| 8 | Encoder B | Hall-Encoder phase B signal |
CN3Shutter & Dry Contact Inputs
| Pin | Signal | Description |
|---|---|---|
| 9 | Shutter N | Shutter neutral connection |
| 10 | Shutter Down | Shutter down command |
| 11 | Shutter Up | Shutter up command |
| 12 | Dry Contact Down | Dry contact — down direction |
| 13 | Dry Contact Up | Dry contact — up direction |
| 14 | Dry Contact COM | Dry contact common |
Datasheet notes
- The board must be mounted inside an enclosure. Do not expose directly to outdoor conditions.
- Before connecting the motor, ensure the supply voltage is correct.
- Encoder cable length should not exceed 3 meters; use shielded cable for longer distances.
- Dry contact inputs must be potential-free (volt-free).
- Motors should not be operated without setting the limits.
10Revision history
No revision has been published yet.